This tutorial demonstrates how to create copper pours in OrCAD PCB Designer. You will learn how to add ground and power planes and draw and merge geometric shapes.
To follow along, visit the blog for step-by-step instructions.
Most Recent Videos
4:17PSpice Simulation Tutorial: How to Ensure Proper Resolution of SPICE Simulation Results
6:45Modeling and Simulating a Power-Aware Parallel Bus System: Part 3
Learn how to make connections between different blocks in a DDR topology and check connectivity to analyze signal integrity with Sigrity.
3:27Building a Serial Link System Topology: Part 2
Learn how to connect blocks in a Serial Link topology and verify connections for signal integrity analysis in Sigrity.
3:45Building a Serial Link System Topology: Part 1
Learn how to build a block-based serial link topology to perform signal integrity analysis with Sigrity.
3:59PSpice Simulation: Creating an RC Circuit
Learn how to create an RC circuit in PSpice to perform various SPICE simulations.
3:42Simulation and Analysis of a Serial Link System: Part 2
Learn how to perform signal integrity analysis for a serial link system and analyze results in Sigrity.
4:03Simulation and Analysis of a Serial Link System: Part 1
Learn how to setup analysis options for signal integrity analysis of a serial link system with Sigrity.
6:09Circuit Simulation and Analysis of a Power-Aware Parallel Bus
Learn how to perform power-aware signal integrity analysis for DDR4, analyze the simulation results and generate a report with Sigrity.
6:45Setting Analysis Options and Timing Budget for Power-Aware Parallel Bus
Learn how to configure a timing budget and simulation analysis options for power-aware DDR analysis with Sigrity.
4:29Modeling and Simulating a Power-Aware Parallel Bus System: Part 2
Learn how to configure the topology for a DDR device to analyze noise due to switching with Sigrity.