Capture Walk-through 5: Net Aliases

This tutorial demonstrates how to assign and edit net aliases in OrCAD Capture version 17.4 (2021). After you complete this tutorial, you will be able to:

  • Place net aliases
  • Add a new net alias to multiple nets and buses

To follow along with this tutorial, continue with the design you completed for Capture Walk-through 4 or use the included design file, CAPTURE TUTORIAL 5_NET ALIASES.DSN.

Reference the provided Smart PDF, capturetutorial.pdf, to assist with net alias placement.

 

  1. Select Place > Net Alias from the menu (N).

  1. Type the name and click OK.
  2. Click to place on every net with that net name.

Note: To rotate, use the R key on the keyboard.

  1. Right click and Edit Properties.
  2. Add the new net name and select OK.

Note: Net aliases for buses can be assigned in the same way.

  1. Place all aliases for nets and buses according to the provided capturetutorial.PDF.
  2. Right click and select End Mode (ESC).

Note: By adding the same net alias to multiple nets, you do not need to physically connect them in the schematic. If your net has a number at the end of the name, this will be incremented every time you place the net alias.

 

 

Previous Article
Capture Walk-through 6: Assign Part Information
Capture Walk-through 6: Assign Part Information

Next Article
Capture Walk-through 4: Wiring
Capture Walk-through 4: Wiring

OrCAD Free Trial

Try OrCAD Today