Numerical Modeling: Boundary Element Method vs. Finite Element Method

Key Takeaways

  • The boundary element method is an interesting method to solve engineering problems, especially those involving differential equations.

  • BEM requires discretization on the body’s surface, simplifying the data needed to process and solve a problem.

  • In numerical modeling, non-linear, nonsymmetric, inhomogeneous problems can be solved faster using BEM vs. FEM.

Numerical modeling

Numerical modeling and simulation provide an easier, cheaper, and highly efficient way of determining solutions for complex mathematical equations

In engineering, numerical modeling and simulation are widely used to solve complex problems. The development of computational numerical modeling has been advantageous in simplifying the problem-solving procedure. In numerical modeling, various methods such as the discrete element method (DEM), finite difference method (FDM), boundary element method (BEM), and finite element method (FEM) are used to develop models and solve problems. While these methods are mostly analogous, here we will compare the boundary element method vs. the finite element method for numerical modeling. 

The Need for Numerical Modeling

In engineering designs, we come across several mathematical calculations, and the task of solving them involves devising the best possible solution. Conducting experiments is one method to reach a solution, but it requires significant effort, time, and money. Despite being prepared, technical difficulties and troubleshooting may delay a whole project.

Numerical modeling and simulation eliminate the need for experimental setup and provide an easier, cheaper, faster, accurate, and highly efficient way of determining solutions for complex mathematical equations. Numerical models are developed to match the physical system perfectly, and solutions can be analyzed and verified with a real system.

Most engineering systems are governed by differential equations or partial differential equations. With the help of numerical methods such as BEM and FEM, we can streamline approaches to the physical system and solve it in no time. 

The Boundary Element Method 

The boundary element method solves engineering problems involving differential equations. BEM is also referred to as the boundary integral equation method (BIEM), as it is efficient in solving boundary value problems. Compared to other numerical methods, BEM is suitable for solving boundary integral equations and other physical problems with complicated boundaries.

BEM can be applied widely to electromagnetic problems associated with electrical machines, actuators, antennas, waveguides, actuators, and others. BEM requires discretization only on a body’s surface, which simplifies data required to process and solve the problem. BEM is a versatile numerical method because it easily generates surface mesh with the aid of discontinuous elements. Additionally, it provides highly accurate solutions obtained with boundary elements. 

Advantages of the Boundary Element Method 

The advantages of BEM can be listed as:

  • Boundary discretization makes the numerical method simpler.
  • Mesh formation is easier in BEM for 3D problems.
  • High accuracy is achieved with BEM, as it is a semi-analytical method. 
  • Suitable for open boundary problems and moving boundary problems.
  • BEM can be combined with analytical methods and numerical methods such as FEM.

The Boundary Element Method vs. Finite Element Method

It is not accurate to say BEM is superior to FEM. Both have advantages and disadvantages depending on the type of physical domain where it is used to solve the problem. The table below compares the boundary element method vs. the finite element method:

Parameter

BEM

FEM

Type of numerical method

Boundary based numerical method

Domain-based numerical method

Discretization

Boundary discretization

(Surfaces and curves are discretized in 3D and 2D problems, respectively)

Full domain or volume discretization

Formulation

Based on ordinary or partial differential equations

Based on boundary integral

equations 

Ease of use

High

Less

Memory requirements

Less due to boundary discretization

Comparatively higher

In numerical modeling, non-linear, nonsymmetric, inhomogeneous problems can be solved faster using these methods. For numerical modeling of a physical system using BEM, more knowledge on fundamental solutions is required. The depth of knowledge on fundamental solutions is one criterion for choosing between the boundary element method vs. the finite element method.

Cadence software offers tools to perform numerical modeling and simulation on your physical systems. Subscribe to our newsletter for the latest updates. If you’re looking to learn more about how Cadence has the solution for you, talk to us and our team of experts

About the Author

Solving electromagnetic, electronics, thermal, and electromechanical simulation challenges to ensure your system works under wide-ranging operating conditions

Visit Website More Content by Cadence System Analysis
Previous Article
Using FinFETs vs. MOSFETs for IC Design
Using FinFETs vs. MOSFETs for IC Design

Understanding the differences between FinFETs vs. MOSFETs can help you choose the best field-effect transis...

Next Article
Component Footprint Differences between Rigid and Flexible Printed Circuits
Component Footprint Differences between Rigid and Flexible Printed Circuits

Depending on the nature of their application, flexible printed circuits have unique requirements for footpr...